{"id":384,"date":"2022-10-23T09:19:44","date_gmt":"2022-10-23T02:19:44","guid":{"rendered":"https:\/\/crossidea.us\/?p=384"},"modified":"2022-10-26T08:58:00","modified_gmt":"2022-10-26T01:58:00","slug":"what-is-vtx-table-can-we-make-it-by-ourselve","status":"publish","type":"post","link":"https:\/\/crossidea.us\/?p=384","title":{"rendered":"What is VTX Table? can we make it by ourselve?"},"content":{"rendered":"\n

For those who are flying Quad, must be familiar with the term ‘VTX Table’, VTX table is actually a set of script that used by betaflight to set VTX’s parameters such as Bands, Channels\/Frequencies, VTX Power Levels, etc<\/p>\n\n\n\n

\n
\n
\"\"\/<\/figure>\n<\/div>\n\n\n\n
\n

those feature only supported by VTX’s which support IRC Tramp Telemetry or TBS’s Smart Audio. (shown on the vtx board by Data\/smartaudio pad\/pin)<\/p>\n\n\n\n

to enable this feature, you need to check first on your flight controller, look for a spare UART pin\/pad, the pin we will use is T pin (TX Pin, you can choose 2\/3\/4\/5\/6 depending on your board feature)<\/p>\n<\/div>\n<\/div>\n\n\n\n

Okay then, lets see, how to make our own VTX Table.<\/p>\n\n\n\n

  1. You need to know first your VTX’s detailed specification (how many bands, channels, how many power levels).
    let say, this is your VTX’s specification, it has:
    – 3 bands (A, B, F)
    – 8 Frequencies
    – 3 Power Level (25mw, 50mw, 100mw)<\/li>
  2. Open your notepad, and start typing this command<\/li><\/ol>\n\n\n\n
    vtxtable bands 3\nvtxtable channels 8\nvtxtable band 1 BOSCAM_A A FACTORY 5865 5845 5825 5805 5785 5765 5745 5725\nvtxtable band 2 BOSCAM_B B FACTORY 5733 5752 5771 5790 5809 5828 5847 5866\nvtxtable band 3 FATSHARK F FACTORY 5740 5760 5780 5800 5820 5840 5860 5880\nvtxtable powerlevels 3\nvtxtable powervalues 25 50 100\nvtxtable powerlabels 25 50 100<\/code><\/pre>\n\n\n\n
    Thats it, just save it and then keep it in your save folder.<\/p>\n\n\n\n
    Later in betaflight, do is as follows:<\/p>\n\n\n\n
    1. Ensure what UART Pad will be used in your FC, after connecting all of the cable needed to the VTX 
      GND<\/strong> -> Negative pole in the quad\/negative pole of the battery

      V<\/strong> -> Positive pole in the quad\/positive pole of the battery (please check and re-check, what is your VTX’s voltage capable of, some of VTX only accept 5V, others may accept to 25V (6S voltage)

      Video in<\/strong> -> Video signal from the FPV Camera (if you want to use directly without FC), or the Video out from the Flight Controller)

      Data\/RC<\/strong> -> TX signal from Flight Controller’s TX’s UART
      <\/li>
    2. Connect your Battery to the quad (please check and re check that you already install the antenna on the VTX)<\/li>
    3. Connect your USB cable to your Quad<\/li>
    4. Open Betaflight Configurator<\/li>
    5. Go to CLI Tab, <\/li>
    6. Copy all of the script on the notepad\/file that you have save earlier, <\/li>
    7. Paste it on the text input on the CLI Tab.<\/li>
    8. Press ‘enter’<\/li>
    9. type ‘save’<\/li>
    10. if you did it correctly, Betaflight configurator will back to the main page (page that shown when we open Betaflight Configurator for the first time)<\/li>
    11. after you reconnect to your quad to Betaflight Configurator, just go to the Video Transmitter tab in Betaflight to check whether your setting already applied or not.<\/li><\/ol>\n\n\n\n
      \"\"\/<\/figure>\n","protected":false},"excerpt":{"rendered":"
      For those who are flying Quad, must be familiar with the term ‘VTX Table’, VTX table is actually a set of script that used by betaflight to set VTX’s parameters such as Bands, Channels\/Frequencies, VTX Power Levels, etc those feature only supported by VTX’s which support IRC Tramp Telemetry or TBS’s Smart Audio. (shown on […]<\/p>\n","protected":false},"author":1,"featured_media":411,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[28],"tags":[],"class_list":["post-384","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-tutorial"],"jetpack_featured_media_url":"https:\/\/crossidea.us\/wp-content\/uploads\/2022\/10\/vtx_tables-og.webp","jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/crossidea.us\/index.php?rest_route=\/wp\/v2\/posts\/384","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/crossidea.us\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/crossidea.us\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/crossidea.us\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/crossidea.us\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=384"}],"version-history":[{"count":11,"href":"https:\/\/crossidea.us\/index.php?rest_route=\/wp\/v2\/posts\/384\/revisions"}],"predecessor-version":[{"id":412,"href":"https:\/\/crossidea.us\/index.php?rest_route=\/wp\/v2\/posts\/384\/revisions\/412"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/crossidea.us\/index.php?rest_route=\/wp\/v2\/media\/411"}],"wp:attachment":[{"href":"https:\/\/crossidea.us\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=384"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/crossidea.us\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=384"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/crossidea.us\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=384"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}